1/2 inch DC12V Pressure Normal Closed Plastic Solenoid Valve

1/2 DC12V Pressure Normal Closed Plastic Solenoid Valve requires a pressure differential to function. 1/2 DC12V Pressure Normal Closed Plastic Solenoid Valve are used in applications with a sufficient pressure differential and a high desired flow rate.

1/2 DC12V Pressure Normal Closed Plastic Solenoid Valve controls the flow of liquid and acts as a valve between high-pressure Liquid! This liquid valve would make a great addition to your robotic gardening project. There are two 1/2” (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.

The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of Liquids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.

Note:  While Connecting Valve in Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the valve)

Specification

Name:1/2” DC 12V Solenoid Valve
Material: PP plastic
Voltage: DC 12V
Current: 1A
Operation model: Indirect acting normally closed (N/C)
Pressure: about 0.02 – 0.8Mpa(Pressure)
Port size: about G1/2”
Fluid temperature: about 0-90℃
Size: Total length: 72mm
Total width: 36mm
Total height: 57mm
Thread: G1/2 “male thread
Thread length: 17mm
Fixed pitch: 25 * 25mm